Static and dynamic data: what changes in the battery passport?
Most of the data in the battery passport is fixed once and for all at placing on the market; only the data in Annex XIII, point 4, changes during the battery's life: performance values, state of health, status and usage data (Art. 77(2) and Annex XIII of Regulation (EU) 2023/1542).
On this page
- Static, dynamic: where does this distinction come from?
- What is a battery's state of health?
- What role does the battery's electronic system (BMS) play?
- How often must the passport be updated?
- Why is dynamic data almost empty at the start?
- Who updates the dynamic data?
- What the text says
- What is not settled yet
Static, dynamic: where does this distinction come from?
The words "static" and "dynamic" do not appear in the regulation. They are terms of common usage (static and dynamic data). The text distinguishes information "relating to the battery model" and information "specific to the individual battery, including resulting from the use of that battery" (Art. 77(2)).
Static: the data applies to the whole model and does not change. The chemistry, the nominal voltage, the weight and the dismantling instructions of an e-scooter battery are the same on day one and at the end of its life.
Dynamic: the data is specific to one individual battery and changes. Annex XIII, point 4, provides for four families:
- (a) the values of the performance and durability parameters of Art. 10(1), at placing on the market and at each change of status (data points 51 to 60);
- (b) the state of health under Art. 14 (data points 61 to 66);
- (c) the status: "original", "repurposed", "re-used", "remanufactured" or "waste" (data point 67);
- (d) usage data: charging cycles, negative events such as accidents, temperature, state of charge (data points 68 to 71).
All this data is reserved for persons with a legitimate interest (Annex XIII, point 4).
What is a battery's state of health?
The state of health is "a measure of the general condition of a rechargeable battery and its ability to deliver the specified performance compared with its initial condition" (Art. 3(28)). In plain terms: what is left of the battery compared with when it was new. An e-bike battery that only holds 80% of its original capacity has a degraded state of health.
The regulation does not measure it in the same way for each category (Annex VII, Part A):
| Category | State of health indicators | Data points |
|---|---|---|
| Electric vehicle battery | State of certified energy (SOCE) | 61 |
| Light means of transport battery (LMT battery: e-bike, e-scooter…) and stationary storage | Remaining capacity; where possible, remaining power capability, remaining round trip efficiency and ohmic resistance; evolution of self-discharging rates | 62 to 66 |
For industrial batteries, Art. 14(1) only covers stationary energy storage systems. For a forklift battery, for example, these data points should therefore be assessed as "if applicable" (see the industrial data sheet).
Not to be confused with the state of charge: the current gauge, expressed as a percentage of the rated capacity (Art. 3(27)).
What role does the battery's electronic system (BMS) play?
The battery management system (BMS) is the electronic "brain" of the battery. The regulation defines it as a device that manages and stores the data needed to determine the state of health and expected lifetime (Art. 3(25)).
Since 18 August 2024, the BMS of LMT batteries, electric vehicle batteries and stationary storage systems must contain up-to-date data on these parameters (Art. 14(1)). The purchaser of the battery, or a third party acting on its behalf, has read-only access to this data (Art. 14(2)).
The BMS is therefore the natural source of dynamic data. The passport is its publication, hosted online. The regulation does not require an automatic link between the two: it is up to the operator to organise the flow of data.
How often must the passport be updated?
The regulation does not set a single frequency for the passport. The Commission put it simply: the frequency of updates of the state of health and dynamic data "depends on need and proportionality" (webinar of 7 July 2026 by DG GROW, the Commission's directorate-general in charge of the internal market). It specified:
- at least at each change of status: remanufacturing, repurposing, re-use, becoming waste;
- more often where this is proportionate and necessary for the use that the person consulting the data makes of it.
The Commission adds that real-time communication is not required: the minimum is to make the information available when a change of status is envisaged, for example when deciding on remanufacturing, repurposing or recycling. For an e-bike battery without a connection, it considers an update when the bike goes to the workshop appropriate (Commission FAQ on the battery passport, questions 8.3, 8.4 and 8.7, non-binding document). The text, for its part, requires the performance values "when it is subject to changes in its status" (Annex XIII, point 4(a)).
At the webinar of 27 May 2026, the Commission had gone into detail: points (a) and (c) at each change of status; point (d) periodically; for the state of health (point (b)), it refers to recital 46 of the regulation, according to which the BMS data should be updated at least once a day; this recital concerns the data kept in the BMS, not the frequency of publication in the passport. A recital explains the text but is not binding; the Commission accepts a lower frequency where it would make no difference, for example if today's measurement is identical to yesterday's.
Why is dynamic data almost empty at the start?
Because a new battery has not been through anything yet. The Commission acknowledges this: the passport must exist, be filled in and be registered at the time of placing on the market, "though dynamic data could be largely empty" (DG GROW, webinar of 7 July 2026).
Example: you import 500 e-scooters from Shenzhen. At customs clearance, each passport contains the model data, the "original" status (data point 67) and the performance values at placing on the market (data points 52 to 56, 59 and 60, mandatory for an LMT battery); the state of health indicators (data points 62 to 66) may still be empty (Commission FAQ on the battery passport, question 8.6, non-binding document). Cycles, temperatures and events (data points 68 to 71) are "if applicable" and remain empty as long as the battery has not been used.
Who updates the dynamic data?
The operator who placed the battery on the market remains responsible for information that is "accurate, complete and up to date" (Art. 77(4)). When a refurbisher (an operator who prepares batteries for re-use or repurposing, repurposes or remanufactures them) remanufactures the battery, it creates a linked passport and takes responsibility for it (Art. 77(7)); the battery receives a new marking that refers to its change of status (Art. 13(9)).
Who else will be able to write in the passport? The right to modify or update the information is restricted according to the access rights of Annex XIII and of the implementing act under Art. 77(9) (Art. 78(f)). This act has not yet been adopted.
What the text says
- The passport contains information on the battery "including resulting from the use of that battery" (Art. 77(2)).
- Annex XIII, point 4(a): the values for performance and durability parameters "when the battery is placed on the market and when it is subject to changes in its status".
What is not settled yet
- Who can write in the passport: repairer, fleet, refurbisher? The act under Art. 77(9), expected by 18 August 2026, has not been adopted. See the pending acts.
- Batteries without a BMS: the Commission considers that the state of health under Art. 14 only applies to batteries that have one (webinar of 27 May 2026; Commission FAQ on the battery passport, question 8.5, non-binding document); yet the Commission guidance v3.2 marks data points 62 to 66 as mandatory for all LMT batteries. The status and the performance values remain due, and the text provides for no exemption for usage data (Annex XIII, point 4(d)).
- Format of values: guidance v3.2 gives a unit or a format for each data point (for example a percentage, or a histogram for the state of charge); the detailed definitions may still change.
What next?
- Take the free diagnostic to find out which dynamic data points concern you.
- Review all the data in the overview.
Page checked on 27 October 2026 against the consolidated text of Regulation (EU) 2023/1542 as of 13 August 2026. This page provides information; it is not legal advice.