Skip to content

What data does the passport of an e-bike or e-scooter battery need?

For a battery of an e-bike, an e-scooter or another light means of transport (LMT battery) placed on the market from 18 February 2027, the Commission counts 71 data points: 49 mandatory, 8 to fill in "if applicable", 2 optional and 12 that must not be filled in at that date (Commission guidance v3.2 of 19 October 2026, which details Annex XIII of Regulation (EU) 2023/1542).

On this page

Who is this page for?

An LMT battery ("light means of transport") is a sealed battery weighing 25 kg or less, designed to power the traction of a wheeled vehicle with an electric motor, with or without pedalling (Art. 3(11)). In plain terms: the battery of an e-bike, a cargo e-bike, an e-scooter, an electric unicycle or a small scooter. There is no capacity threshold: every LMT battery has a passport (Art. 77(1)).

This page concerns you if you are the company that places the battery on the market, meaning the one that first sells or supplies it in Europe: the importer of Chinese e-scooters, the assembler (pack assembler) that builds its own packs, the brand that sells under its own name. It is up to you to ensure that the information in the battery passport is "accurate, complete and up to date" (Art. 77(4)). If you are not yet sure whether this is your case, the page who is responsible? helps you decide.

What sets a light means of transport battery apart

Three differences from the other categories, all taken from the text:

  • No capacity threshold for exhaustion (point 33): Annex XIII, point 1(k), reserves it for electric vehicle batteries.
  • No state of certified energy (SOCE, point 61): this state of health indicator is specific to electric vehicles (Annex VII, Part A).
  • Five state of health indicators, marked mandatory by the guidance (points 62 to 66): remaining capacity, remaining power capability, remaining round trip efficiency, self-discharge, ohmic resistance. They take over Annex VII, Part A, and Art. 14, which only require three of them (power, efficiency, resistance) "where possible". They come from the battery management system (BMS), the electronic system that controls the battery.

How to read the table

The 71 points are grouped into seven families, from identification to conformity. For each point:

  • No.: the number in the Commission guidance (1 to 71).
  • Data point: the original English label of the Commission guidance; where useful, a short explanation in brackets. In case of doubt, the English label of the guidance prevails.
  • Section: the letter of Annex XIII the point comes from (points 1 and 2 come from Art. 77(3)).
  • Access: who can see the data. "Public": everyone, by scanning the QR code; "Legitimate interest": repairers, refurbishers, recyclers, buyers (legitimate interest), and also the authorities for points 46 to 49; "Authorities only": notified bodies, market surveillance, Commission (Art. 77(2)).
  • Model or individual battery: "Model" means the value is the same for all batteries of the model; "Individual battery" that it is specific to each battery. "Dynamic": the value changes over the battery's life.
  • Status: mandatory, if applicable, optional, or "not required: do not fill in" at 18 February 2027.
  • Note: the condition or the reason for the status.
  • Acronyms and units in the table: the international standard for unique identifiers, ISO/IEC 15459 (point 1); two common lithium-ion chemistries, lithium iron phosphate (LFP) and nickel manganese cobalt (NMC) (point 12); capacity, in ampere-hours (Ah); power, in watts (W); internal resistance, in ohms (Ω).

A sentence in italics under each family heading says who holds the information in practice. It is a help for collecting data, not a rule.

Identification

Who holds the information, in practice: the operator placing the battery on the market (points 1 and 2); the factory or the assembler for the rest (data sheet, label, declaration of conformity).

Wide table: scroll it to the right to see all the columns.

No.Data point (original guidance label)SectionAccessModel or individual batteryStatusNote
1Unique identifierArt. 77(3)Public (inferred)Individual battery (static)MandatoryAssigned by the operator placing the battery on the market, according to ISO/IEC 15459 or equivalent (Art. 77(3)). Not in Annex XIII: access level inferred.
Note

Assigned by the operator placing the battery on the market, according to ISO/IEC 15459 or equivalent (Art. 77(3)). Not in Annex XIII: access level inferred.

2Identity of who is registering and/or is responsible for the battery passportArt. 77(3)Public (inferred)Individual battery (static)MandatoryThe operator responsible for the passport (Art. 77(4) and 77(7)). Not in Annex XIII: access level inferred.
Note

The operator responsible for the passport (Art. 77(4) and 77(7)). Not in Annex XIII: access level inferred.

3Manufacturer name, registered trade name or registered trademarkAnnex XIII 1(a)PublicModel (static)MandatoryAnnex VI, Part A, point 1. Also appears in the declaration of conformity.
Note

Annex VI, Part A, point 1. Also appears in the declaration of conformity.

4Manufacturer postal address, indicating a single contact pointAnnex XIII 1(a)PublicModel (static)MandatoryAnnex VI, Part A, point 1.
Note

Annex VI, Part A, point 1.

5If available, manufacturer web and email addressAnnex XIII 1(a)PublicModel (static)OptionalOptional: fill in only if the information exists.
Note

Optional: fill in only if the information exists.

6Battery category (LMT, industrial, electric vehicle)Annex XIII 1(a)PublicModel (static)MandatoryAnnex VI, Part A, point 2; categories defined in Art. 3, points 11, 13 and 14.
Note

Annex VI, Part A, point 2; categories defined in Art. 3, points 11, 13 and 14.

7Model identification and batch or serial number, or product number or another element allowing their identificationAnnex XIII 1(a)PublicModel (static)MandatoryAnnex VI, Part A, point 2. The guidance files this point under model data; in practice, the batch or serial number varies from one battery to another.
Note

Annex VI, Part A, point 2. The guidance files this point under model data; in practice, the batch or serial number varies from one battery to another.

8The place of manufacturer (geographical location of a battery manufacturing plant)Annex XIII 1(a)PublicModel (static)MandatoryAnnex VI, Part A, point 3.
Note

Annex VI, Part A, point 3.

9The date of manufacturing (month and year)Annex XIII 1(a)PublicModel (static)MandatoryAnnex VI, Part A, point 4. The guidance files this point under model data; in practice, the date of manufacture varies from one batch or battery to another.
Note

Annex VI, Part A, point 4. The guidance files this point under model data; in practice, the date of manufacture varies from one batch or battery to another.

Chemistry and composition

Who holds the information, in practice: the factory that makes the battery, which itself gets this data from its cell and material suppliers.

Wide table: scroll it to the right to see all the columns.

No.Data point (original guidance label)SectionAccessModel or individual batteryStatusNote
12The chemistry (for example lithium-ion LFP or NMC)Annex XIII 1(a)PublicModel (static)MandatoryAnnex VI, Part A, point 7.
Note

Annex VI, Part A, point 7.

13The hazardous substances present in the battery, other than mercury, cadmium or leadAnnex XIII 1(a)PublicModel (static)MandatoryAnnex VI, Part A, point 8.
Note

Annex VI, Part A, point 8.

15Critical raw materials present in the battery in a concentration of more than 0,1 % weight by weightAnnex XIII 1(a)PublicModel (static)MandatoryAnnex VI, Part A, point 10. Threshold: more than 0.1 % by weight.
Note

Annex VI, Part A, point 10. Threshold: more than 0.1 % by weight.

16The material composition of the battery, including its chemistry, hazardous substances present in the battery, other than mercury, cadmium or lead, and critical raw materials present in the batteryAnnex XIII 1(b)PublicModel (static)Not required: do not fill inDuplicate: already covered by points 12, 13 and 15 (guidance v3.2). Do not enter it a second time.
Note

Duplicate: already covered by points 12, 13 and 15 (guidance v3.2). Do not enter it a second time.

24The share of renewable contentAnnex XIII 1(f)PublicModel (static)MandatoryAnnex XIII, 1(f). Recital 123 gives the example of a lignin-based material replacing graphite.
Note

Annex XIII, 1(f). Recital 123 gives the example of a lignin-based material replacing graphite.

46Detailed composition, including materials used in the cathode, anode and electrolyteAnnex XIII 2(a)Legitimate interest and authoritiesModel (static)MandatoryAnnex XIII, 2(a), no threshold. For the Commission, a reporting threshold of 1% or 0.1% may be reasonable, provided it goes beyond a simple chemistry such as "LFP" (Commission FAQ on the battery passport, question 7.7, non-binding document).
Note

Annex XIII, 2(a), no threshold. For the Commission, a reporting threshold of 1% or 0.1% may be reasonable, provided it goes beyond a simple chemistry such as "LFP" (Commission FAQ on the battery passport, question 7.7, non-binding document).

Performance and durability

Who holds the information, in practice: the factory or the assembler (data sheet) and the laboratory that carried out the tests; the warranty (point 35) is for the seller.

Wide table: scroll it to the right to see all the columns.

No.Data point (original guidance label)SectionAccessModel or individual batteryStatusNote
10The weightAnnex XIII 1(a)PublicModel (static)MandatoryAnnex VI, Part A, point 5.
Note

Annex VI, Part A, point 5.

11The capacityAnnex XIII 1(a)PublicModel (static)MandatoryAnnex VI, Part A, point 6. Also covers point 25.
Note

Annex VI, Part A, point 6. Also covers point 25.

25Rated capacity (in Ah)Annex XIII 1(g)PublicModel (static)Not required: do not fill inDuplicate of point 11 (guidance v3.2). Do not enter it a second time.
Note

Duplicate of point 11 (guidance v3.2). Do not enter it a second time.

26Minimal voltage, with temperature range when relevantAnnex XIII 1(h)PublicModel (static)MandatoryAnnex XIII, 1(h).
Note

Annex XIII, 1(h).

27Nominal voltage, with temperature range when relevantAnnex XIII 1(h)PublicModel (static)MandatoryAnnex XIII, 1(h).
Note

Annex XIII, 1(h).

28Maximum voltage, with temperature range when relevantAnnex XIII 1(h)PublicModel (static)MandatoryAnnex XIII, 1(h).
Note

Annex XIII, 1(h).

29Original power capability (in Watts)Annex XIII 1(i)PublicModel (static)MandatoryAnnex XIII, 1(i).
Note

Annex XIII, 1(i).

30Power limits, with temperature range when relevantAnnex XIII 1(i)PublicModel (static)MandatoryAnnex XIII, 1(i).
Note

Annex XIII, 1(i).

31Expected battery lifetime expressed in cyclesAnnex XIII 1(j)PublicModel (static)MandatoryAnnex XIII, 1(j).
Note

Annex XIII, 1(j).

32Reference test used for expected battery lifetime expressed in cyclesAnnex XIII 1(j)PublicModel (static)MandatoryAnnex XIII, 1(j).
Note

Annex XIII, 1(j).

33Capacity threshold for exhaustion (the capacity level below which the battery is considered worn out)Annex XIII 1(k)PublicModel (static)Not required: do not fill inReserved for electric vehicle batteries (Annex XIII, 1(k)).
Note

Reserved for electric vehicle batteries (Annex XIII, 1(k)).

34Temperature range the battery can withstand when not in use (reference test)Annex XIII 1(l)PublicModel (static)MandatoryAnnex XIII, 1(l).
Note

Annex XIII, 1(l).

35Period for which the commercial warranty for the calendar life appliesAnnex XIII 1(m)PublicModel (static)If applicableOnly if a commercial warranty is offered (Annex XIII, 1(m); guidance v3.2).
Note

Only if a commercial warranty is offered (Annex XIII, 1(m); guidance v3.2).

36Initial round trip energy efficiency (the share of stored energy that you get back)Annex XIII 1(n)PublicModel (static)MandatoryAnnex XIII, 1(n).
Note

Annex XIII, 1(n).

37Round trip energy efficiency at 50 % of cycle-lifeAnnex XIII 1(n)PublicModel (static)MandatoryAnnex XIII, 1(n). Measured at 50 % of cycle life.
Note

Annex XIII, 1(n). Measured at 50 % of cycle life.

38Internal battery cell and pack resistanceAnnex XIII 1(o)PublicModel (static)MandatoryAnnex XIII, 1(o).
Note

Annex XIII, 1(o).

39Charge C-rate of relevant cycle-life test (the charge speed used for the test)Annex XIII 1(p)PublicModel (static)MandatoryAnnex XIII, 1(p).
Note

Annex XIII, 1(p).

40Discharge C-rate of relevant cycle-life test (the discharge speed used for the test)Annex XIII 1(p)PublicModel (static)OptionalAnnex XIII, 1(p). Data point added by guidance v3.2, optional.
Note

Annex XIII, 1(p). Data point added by guidance v3.2, optional.

Carbon, recycled content and due diligence

Who holds the information, in practice: not applicable at 18 February 2027: these points are not filled in yet.

Wide table: scroll it to the right to see all the columns.

No.Data point (original guidance label)SectionAccessModel or individual batteryStatusNote
17The carbon footprint declarationAnnex XIII 1(c)PublicModel (static)Not required: do not fill inCarbon footprint (Art. 7): format to be set by a forthcoming implementing act. Do not fill in at 18 February 2027.
Note

Carbon footprint (Art. 7): format to be set by a forthcoming implementing act. Do not fill in at 18 February 2027.

18The carbon footprint labelAnnex XIII 1(c)PublicModel (static)Not required: do not fill inCarbon footprint (Art. 7): format to be set by a forthcoming implementing act. Do not fill in at 18 February 2027.
Note

Carbon footprint (Art. 7): format to be set by a forthcoming implementing act. Do not fill in at 18 February 2027.

19Information on responsible sourcing as indicated in the report on battery due diligence policy referred to in Article 52(3)Annex XIII 1(d)PublicModel (static)Not required: do not fill inDue diligence: applies from 18 August 2027 (Art. 48(1)); report under Art. 52(3). Do not fill in at 18 February 2027.
Note

Due diligence: applies from 18 August 2027 (Art. 48(1)); report under Art. 52(3). Do not fill in at 18 February 2027.

20Percentage share of cobalt that is present in active materials and that has been recovered from battery manufacturing waste or post-consumer wasteAnnex XIII 1(e)PublicModel (static)Not required: do not fill inRecycled content (Art. 8): depends on the forthcoming delegated act. Do not fill in at 18 February 2027.
Note

Recycled content (Art. 8): depends on the forthcoming delegated act. Do not fill in at 18 February 2027.

21Percentage share of lithium that is present in active materials and that has been recovered from battery manufacturing waste or post-consumer wasteAnnex XIII 1(e)PublicModel (static)Not required: do not fill inRecycled content (Art. 8): depends on the forthcoming delegated act. Do not fill in at 18 February 2027.
Note

Recycled content (Art. 8): depends on the forthcoming delegated act. Do not fill in at 18 February 2027.

22Percentage share of nickel that is present in active materials and that has been recovered from battery manufacturing waste or post-consumer wasteAnnex XIII 1(e)PublicModel (static)Not required: do not fill inRecycled content (Art. 8): depends on the forthcoming delegated act. Do not fill in at 18 February 2027.
Note

Recycled content (Art. 8): depends on the forthcoming delegated act. Do not fill in at 18 February 2027.

23The percentage share of lead that is present in the battery and that has been recovered from wasteAnnex XIII 1(e)PublicModel (static)Not required: do not fill inRecycled content (Art. 8): depends on the forthcoming delegated act. Do not fill in at 18 February 2027.
Note

Recycled content (Art. 8): depends on the forthcoming delegated act. Do not fill in at 18 February 2027.

Dismantling and safety

Who holds the information, in practice: the factory or the assembler that designed the pack (drawings, bill of materials, procedures).

Wide table: scroll it to the right to see all the columns.

No.Data point (original guidance label)SectionAccessModel or individual batteryStatusNote
14Usable extinguishing agent (what can put out a fire on this battery)Annex XIII 1(a)PublicModel (static)MandatoryAnnex VI, Part A, point 9.
Note

Annex VI, Part A, point 9.

45Clear, understandable and readable instructions for use in a format that makes it possible to print, download and save them on an electronic device so that the user can access them at all times, in particular during a breakdown of the batteryAnnex XIII 1(t)PublicModel (static)Not required: do not fill inPoint 1(t) proposed by COM(2025) 504, for stationary battery energy storage systems only; not adopted. Do not fill in at 18 February 2027.
Note

Point 1(t) proposed by COM(2025) 504, for stationary battery energy storage systems only; not adopted. Do not fill in at 18 February 2027.

47Part numbers for components and contact details of sources for replacement sparesAnnex XIII 2(b)Legitimate interest and authoritiesModel (static)MandatoryAnnex XIII, 2(b). Guidance v3.2 expects a web link.
Note

Annex XIII, 2(b). Guidance v3.2 expects a web link.

48Dismantling information, including at least: - exploded diagrams of the battery system/pack showing the location of battery cells, - disassembly sequences, - type and number of fastening techniques to be unlocked, - tools required for disassembly, - warnings if risk of damaging parts exist, - amount of cells used and layoutAnnex XIII 2(c)Legitimate interest and authoritiesModel (static)MandatoryAnnex XIII, 2(c).
Note

Annex XIII, 2(c).

49Safety measuresAnnex XIII 2(d)Legitimate interest and authoritiesModel (static)MandatoryAnnex XIII, 2(d); including during dismantling (Art. 77(2)).
Note

Annex XIII, 2(d); including during dismantling (Art. 77(2)).

State of health and use

Who holds the information, in practice: the starting value comes from the factory or the laboratory; after that, from the battery's BMS, read by the user, the repairer or the refurbisher. The status (point 67) is updated by the responsible operator.

Wide table: scroll it to the right to see all the columns.

No.Data point (original guidance label)SectionAccessModel or individual batteryStatusNote
51Rated capacity (in Ah) (value tracked over time)Annex XIII 4(a)Legitimate interestIndividual battery (dynamic)MandatorySame data as point 11 according to guidance v3.2; it is listed among the data of each individual battery (Annex XIII, 4(a)), so it is tracked over the battery's life.
Note

Same data as point 11 according to guidance v3.2; it is listed among the data of each individual battery (Annex XIII, 4(a)), so it is tracked over the battery's life.

52Capacity fade (in %)Annex XIII 4(a)Legitimate interestIndividual battery (dynamic)MandatoryParameter of Art. 10(1) and Annex IV (Annex XIII, 4(a)).
Note

Parameter of Art. 10(1) and Annex IV (Annex XIII, 4(a)).

53Power (in W)Annex XIII 4(a)Legitimate interestIndividual battery (dynamic)MandatoryParameter of Art. 10(1) and Annex IV (Annex XIII, 4(a)).
Note

Parameter of Art. 10(1) and Annex IV (Annex XIII, 4(a)).

54Power fade (in %)Annex XIII 4(a)Legitimate interestIndividual battery (dynamic)MandatoryParameter of Art. 10(1) and Annex IV (Annex XIII, 4(a)).
Note

Parameter of Art. 10(1) and Annex IV (Annex XIII, 4(a)).

55Internal resistance (in Ω)Annex XIII 4(a)Legitimate interestIndividual battery (dynamic)MandatoryParameter of Art. 10(1) and Annex IV (Annex XIII, 4(a)).
Note

Parameter of Art. 10(1) and Annex IV (Annex XIII, 4(a)).

56Internal resistance increase (in %)Annex XIII 4(a)Legitimate interestIndividual battery (dynamic)MandatoryParameter of Art. 10(1) and Annex IV (Annex XIII, 4(a)).
Note

Parameter of Art. 10(1) and Annex IV (Annex XIII, 4(a)).

57Where applicable, energy round trip efficiency (in %)Annex XIII 4(a)Legitimate interestIndividual battery (dynamic)If applicableWhere applicable (Annex XIII, 4(a); guidance v3.2).
Note

Where applicable (Annex XIII, 4(a); guidance v3.2).

58Where applicable, energy round trip efficiency fade (in %)Annex XIII 4(a)Legitimate interestIndividual battery (dynamic)If applicableWhere applicable (Annex XIII, 4(a); guidance v3.2).
Note

Where applicable (Annex XIII, 4(a); guidance v3.2).

59The expected life-time of the battery under the reference conditions for which it has been designed, in terms of cycles, except for non-cycle applicationsAnnex XIII 4(a)Legitimate interestIndividual battery (dynamic)MandatoryParameter of Art. 10(1) and Annex IV (Annex XIII, 4(a)).
Note

Parameter of Art. 10(1) and Annex IV (Annex XIII, 4(a)).

60The expected life-time of the battery under the reference conditions for which it has been designed, in terms of calendar yearsAnnex XIII 4(a)Legitimate interestIndividual battery (dynamic)MandatoryParameter of Art. 10(1) and Annex IV (Annex XIII, 4(a)).
Note

Parameter of Art. 10(1) and Annex IV (Annex XIII, 4(a)).

61Information on the state of health of the battery pursuant to Article 14: state of certified energy (SOCE)Annex XIII 4(b)Legitimate interestIndividual battery (dynamic)Not required: do not fill inReserved for electric vehicle batteries (Art. 14; Annex VII, Part A).
Note

Reserved for electric vehicle batteries (Art. 14; Annex VII, Part A).

62Information on the state of health of the battery pursuant to Article 14: remaining capacityAnnex XIII 4(b)Legitimate interestIndividual battery (dynamic)MandatoryState of health (Art. 14): parameter for LMT batteries (Art. 14; Annex VII, Part A).
Note

State of health (Art. 14): parameter for LMT batteries (Art. 14; Annex VII, Part A).

63Information on the state of health of the battery pursuant to Article 14: where possible, the remaining power capabilityAnnex XIII 4(b)Legitimate interestIndividual battery (dynamic)MandatoryState of health (Art. 14): "where possible" (Annex VII, Part A).
Note

State of health (Art. 14): "where possible" (Annex VII, Part A).

64Information on the state of health of the battery pursuant to Article 14: where possible, the remaining round trip efficiencyAnnex XIII 4(b)Legitimate interestIndividual battery (dynamic)MandatoryState of health (Art. 14): "where possible" (Annex VII, Part A).
Note

State of health (Art. 14): "where possible" (Annex VII, Part A).

65Information on the state of health of the battery pursuant to Article 14: [where possible,] the evolution of self-discharging ratesAnnex XIII 4(b)Legitimate interestIndividual battery (dynamic)MandatoryState of health (Art. 14): Annex VII, Part A, point 4. The guidance adds "[where possible]" in square brackets.
Note

State of health (Art. 14): Annex VII, Part A, point 4. The guidance adds "[where possible]" in square brackets.

66Information on the state of health of the battery pursuant to Article 14: where possible, the ohmic resistanceAnnex XIII 4(b)Legitimate interestIndividual battery (dynamic)MandatoryState of health (Art. 14): "where possible" (Annex VII, Part A).
Note

State of health (Art. 14): "where possible" (Annex VII, Part A).

67Information on the status of the battery, defined as ‘original’, ‘repurposed’, ‘re-used’, ‘remanufactured’ or ‘waste’Annex XIII 4(c)Legitimate interestIndividual battery (dynamic)MandatoryAnnex XIII, 4(c). To be updated at each change of status (Art. 13(9); Art. 77(7)).
Note

Annex XIII, 4(c). To be updated at each change of status (Art. 13(9); Art. 77(7)).

68The number of charging and discharging cyclesAnnex XIII 4(d)Legitimate interestIndividual battery (dynamic)If applicable"Applicable as soon as the battery starts being used" according to guidance v3.2: this data may remain empty as long as the battery has not been used (Commission FAQ on the battery passport, questions 8.5 and 8.6, non-binding document).
Note

"Applicable as soon as the battery starts being used" according to guidance v3.2: this data may remain empty as long as the battery has not been used (Commission FAQ on the battery passport, questions 8.5 and 8.6, non-binding document).

69Negative events, such as accidentsAnnex XIII 4(d)Legitimate interestIndividual battery (dynamic)If applicable"Applicable as soon as the battery starts being used" according to guidance v3.2: this data may remain empty as long as the battery has not been used (Commission FAQ on the battery passport, questions 8.5 and 8.6, non-binding document).
Note

"Applicable as soon as the battery starts being used" according to guidance v3.2: this data may remain empty as long as the battery has not been used (Commission FAQ on the battery passport, questions 8.5 and 8.6, non-binding document).

70Periodically recorded information on the operating environmental conditions, including temperatureAnnex XIII 4(d)Legitimate interestIndividual battery (dynamic)If applicable"Applicable as soon as the battery starts being used" according to guidance v3.2: this data may remain empty as long as the battery has not been used (Commission FAQ on the battery passport, questions 8.5 and 8.6, non-binding document).
Note

"Applicable as soon as the battery starts being used" according to guidance v3.2: this data may remain empty as long as the battery has not been used (Commission FAQ on the battery passport, questions 8.5 and 8.6, non-binding document).

71Periodically recorded information on the state of charge (how "full" the battery is)Annex XIII 4(d)Legitimate interestIndividual battery (dynamic)If applicable"Applicable as soon as the battery starts being used" according to guidance v3.2: this data may remain empty as long as the battery has not been used (Commission FAQ on the battery passport, questions 8.5 and 8.6, non-binding document).
Note

"Applicable as soon as the battery starts being used" according to guidance v3.2: this data may remain empty as long as the battery has not been used (Commission FAQ on the battery passport, questions 8.5 and 8.6, non-binding document).

Conformity

Who holds the information, in practice: the manufacturer (markings, declaration of conformity), the laboratory or the notified body (test reports); the producer or its producer responsibility organisation for the information on waste (point 44).

Wide table: scroll it to the right to see all the columns.

No.Data point (original guidance label)SectionAccessModel or individual batteryStatusNote
41The marking requirements laid down in Article 13(4)Annex XIII 1(q)PublicModel (static)MandatoryMarking under Art. 13(4): "separate collection" symbol (crossed-out wheeled bin). Annex XIII, 1(q); symbol described in Annex VI, Part B.
Note

Marking under Art. 13(4): "separate collection" symbol (crossed-out wheeled bin). Annex XIII, 1(q); symbol described in Annex VI, Part B.

42The marking requirements laid down in Article 13(5)Annex XIII 1(q)PublicModel (static)If applicableMarking under Art. 13(5): chemical symbol Cd or Pb. Only if the battery contains more than 0.002 % cadmium or more than 0.004 % lead (Art. 13(5)).
Note

Marking under Art. 13(5): chemical symbol Cd or Pb. Only if the battery contains more than 0.002 % cadmium or more than 0.004 % lead (Art. 13(5)).

43The EU declaration of conformity referred to in Article 18Annex XIII 1(r)PublicModel (static)MandatoryAnnex XIII, 1(r); Art. 18.
Note

Annex XIII, 1(r); Art. 18.

44The information regarding the prevention and management of waste batteries laid down in Article 74(1), points (a) to (f).Annex XIII 1(s)PublicModel (static)MandatoryInformation on the prevention and management of waste batteries (Art. 74(1), points (a) to (f)), provided by the producer or its producer responsibility organisation (Art. 74(1)); according to the Commission, a link to their online platform is possible (webinar of 27 May 2026).
Note

Information on the prevention and management of waste batteries (Art. 74(1), points (a) to (f)), provided by the producer or its producer responsibility organisation (Art. 74(1)); according to the Commission, a link to their online platform is possible (webinar of 27 May 2026).

50Results of test reports proving compliance with the requirements laid down in this Regulation or any delegated or implementing act adopted pursuant to this RegulationAnnex XIII 3Authorities onlyModel (static)MandatoryAnnex XIII, point 3: reserved for notified bodies, market surveillance authorities and the Commission.
Note

Annex XIII, point 3: reserved for notified bodies, market surveillance authorities and the Commission.

Total for the "LMT battery" category: 71 points: 49 mandatory, 8 "if applicable", 2 optional, 12 not required at 18 February 2027 (automatic count based on guidance 3.2 (19 October 2026)).

What is not settled yet

  • Who has a "legitimate interest": the implementing act that is to specify it (Art. 77(9)) was due to be adopted by 18 August 2026 at the latest; it has not been adopted yet. See the pending acts.
  • Points 1 and 2: they are not in Annex XIII; their "public" access level is our own inference (the identifier is the key to access the passport, Art. 77(3)).
  • LMT battery without a BMS: the state of health (points 62 to 66) falls under Art. 14, which covers the data of the battery management system; for the Commission, it only applies to batteries with a BMS (webinar of 27 May 2026; Commission FAQ on the battery passport, question 8.5, non-binding document), although the guidance v3.2 marks these points as mandatory for all LMT batteries. The status (point 67) and the performance values at placing on the market (Annex XIII, point 4(a)) remain due. For the usage data (points 68 to 71, Annex XIII, point 4(d)), the Commission stresses that the text does not provide for the same exemption.
  • The guidance is not binding: it states itself that it creates no new obligation and that it may change.

E-mail alerts →

What next?

Data source and licence. The data points, their numbering, their English labels and their statuses are taken from the "Guidance Document: Digital Batteries Passport – data points by category", version 3.2 of 19 October 2026, © European Union, 2026, reused under the CC BY 4.0 licence (Decision 2011/833/EU). Changes made by Produpass: French translation (in the French version), groupings, notes and references to articles. This Commission document is not binding, and the Commission does not approve or endorse this site.

Page checked on 27 October 2026 against the consolidated text of Regulation (EU) 2023/1542 as of 13 August 2026. This page provides information; it is not legal advice.