Skip to content

Which QR code and which identifier does a battery need in 2027?

From 18 February 2027, every battery must carry a readable QR code, the black-and-white square you scan with a phone; for an e-bike, e-scooter or other light means of transport battery (LMT battery), an industrial battery of more than 2 kWh (kilowatt-hours, the energy the battery can store) or an electric vehicle battery, this QR code links to a unique identifier compliant with the ISO/IEC 15459 international standards, which opens its passport (Art. 13(6) and 77(3) of Regulation (EU) 2023/1542).

On this page

Will all batteries have a QR code?

Yes. From 18 February 2027, "all batteries shall be marked with a QR code" (Art. 13(6)). In our reading, this covers batteries placed on the market from that date, individual battery by individual battery, and not the stock already placed on the market; the text does not say so expressly (see batteries without a passport). What the QR code opens depends on the category:

  • for an LMT battery, an industrial battery of more than 2 kWh and an electric vehicle battery: the battery passport (Art. 13(6), point (a));
  • for the others, for example a portable battery: the labelling, the declaration of conformity, the due diligence report and the waste information (Art. 13(6), point (b)).

The QR code is defined as "a machine-readable matrix code that links to information as required by this Regulation" (Art. 3(24)).

What rules apply to the code itself?

They are brief. The QR code must be in high contrast to the background and of a size that makes it readable by a commonly available reader, such as a phone (Annex VI, Part C). It is printed or engraved "visibly, legibly and indelibly" on the battery; if this is not possible given its size or nature, it goes on the packaging and the accompanying documents (Art. 13(7)).

What about the ISO/IEC 18004 standard? It is the international standard that defines the QR code format, the one that every phone reads. The regulation does not cite it: it only speaks of a "QR code". In practice, a QR code is an ISO/IEC 18004 code.

Example: you assemble cargo bike packs. The QR code can be laser-engraved on the casing, in a place that is visible without dismantling the battery. On a small, highly integrated e-scooter battery, it will rather go on the packaging and the instructions.

What is the unique identifier?

The unique identifier is "a unique string of characters for the identification of batteries that also enables a web link to the battery passport" (Art. 3(66)). It is the number that no other battery in the world shares.

You attribute it if you place the battery on the market: the QR code "links to a unique identifier that the economic operator placing the battery on the market shall attribute to it" (Art. 77(3)). This identifier is also what you will declare to the EU registry (Art. 77(10)).

You can create these identifiers yourself, following the rules of the applicable standards, or use a commercial service (Commission FAQ on the battery passport, question 5.2, non-binding document). In both cases, the identifier must remain compliant with ISO/IEC 15459 or an equivalent (Art. 77(3)).

Why ISO/IEC 15459, and what does GS1 have to do with it?

Art. 77(3) requires the QR code and the identifier to comply with the ISO/IEC 15459 standards, parts 1 to 6, "or their equivalent". The ISO/IEC 15459 series organises the worldwide uniqueness of identifiers: each identifier starts with the code of a recognised issuing agency, a bit like the country code at the start of a phone number. This code guarantees that two companies will never produce the same number.

GS1 is the most widespread issuing agency: it manages the barcodes of consumer goods. In practice, an SME joins GS1 in its country and receives a company prefix; it then builds its identifiers from that prefix. Membership is not free; its fees are set by the GS1 organisation of each country.

In practice, many players use the GS1 Digital Link format: a web address that contains the GS1 identifier and that the QR code encodes. This is a market practice, not an obligation under the regulation.

What can you not do?

  • Invent your own identifier without an issuing agency. "Self-issued" schemes exist (the IEC 61406 standard, decentralised identifiers defined by the W3C, the consortium that sets web standards) and are accepted by the European standard EN 18219 (EN 18219:2026, § 5.3 to 5.6). But they do not follow ISO/IEC 15459, which Art. 77(3) cites for batteries "or their equivalent", without saying what an equivalent is. Our cautious reading: as long as Art. 77(3) cites ISO/IEC 15459, it is better to rule them out. The draft delegated act of 29 September 2026, which would refer to EN 18219, would make them eligible if adopted.
  • Replace the QR code with a contactless chip (NFC or RFID, readable at short range). Only a delegated act could authorise other smart labels instead of or in addition to the QR code (Art. 13(8)); none has been adopted.

Because the QR code does not contain the passport: it contains an address. The passport is hosted online, while the QR code is engraved on the battery for its whole life. If the address stops working, the QR code leads to a dead page, and thousands of batteries already sold cannot be re-engraved.

Yet the passport must remain available even if the company that created it ceases to exist or leaves the Union (Art. 78(e)), and it only ceases to exist after the battery has been recycled (Art. 77(8)). The regulation sets no duration in years: the QR code must work for the whole life of the battery, second life included. Two practical consequences: choose an address that you control (your own domain name or a GS1 resolver), and hosting designed to last.

A refurbisher (an operator who prepares batteries for re-use or repurposing, repurposes or remanufactures them) affixes new markings, accessible through the QR code, which refer to the battery's change of status (Art. 13(9)).

What the text says

  • "The battery passport shall be accessible through the QR code referred to in Article 13(6) which links to a unique identifier that the economic operator placing the battery on the market shall attribute to it" (Art. 77(3)).
  • "The QR code and the unique identifier shall comply with the ISO/IEC standards 15459-1:2014, 15459-2:2015, 15459-3:2014, 15459-4:2014, 15459-5:2014 and 15459-6:2014 or their equivalent" (Art. 77(3)).

What is not settled yet

  • "Or their equivalent": the text does not say what an equivalent is. A draft delegated act, published for feedback on 29 September 2026, would replace the ISO/IEC 15459 series with standard EN 18220:2026 for the QR code and standard EN 18219:2026 for the unique identifier, still "or their equivalent". It has not been adopted: ISO/IEC 15459 remains the reference. At the webinar of 27 May 2026, the Commission had indicated that the current standards would remain usable. See the pending acts.
  • Format required by the registry: the registry user guide asks for a product identifier in web address format compliant with the standards of the joint technical committee in charge of the digital product passport within the European standardisation organisations (CEN-CENELEC JTC 24) (guide v1.03, § 6.2.1). The Commission does not explain how this fits with ISO/IEC 15459; we have not yet checked it against the standards themselves.
  • What EN 18219 and EN 18220 would change: EN 18219 accepts several identifier schemes, including an ISO/IEC 15459 identifier (for example GS1) written as a web address, for GS1 the "GS1 Digital Link"; it also accepts self-issued identifiers. EN 18220 sets the form of the QR code (standard ISO/IEC 18004:2024, full web address) and gives indicative values for print size and quality (EN 18219:2026, § 5.2 to 5.6; EN 18220:2026, § 5 and Annex B). These standards would only become mandatory once the draft delegated act is adopted.

E-mail alerts →

What next?

  • Take the free diagnostic to find out whether your batteries have a passport or only a QR code.
  • Read how the EU registry, where you will declare your identifiers, works.

Page checked on 30 September 2026 against the consolidated text of Regulation (EU) 2023/1542 as of 13 August 2026. This page provides information; it is not legal advice.